What is an enhancement detail ? Basically an enhancement detail refreshes your vehicles exterior paintwork to add more gloss and depth to the paint whilst reducing swirls/scratches by up to 70%-80% as a general rule..
Power wash exterior to remove loose dirt/grit,
Clean door shuts hinges etc with citrus degreaser and rinse,
Pre-foam vehicle with snowfoam allow to dwell for several minutes then rinse off..
Wash vehicle using two bucket method, then rinse off and dry with microfibre drying towel,
Apply tar remover to lower half of vehicle .
Then we clean all paintwork/glass with a clay bar which removes tree sap remaining tar, brake dust etc,
Then using 3m blue tape we mask any plastics to stop polish staining trim etc, then we use our ( ptg) paint thickness gauge this helps us in a number of ways firstly It gives us an idea of how much clearcoat we have to play with it also gives an indication of low spots, previous correction or even if panels have been re-sprayed acts really as our safety barrier and we take various readings on each panel just to be safe.
The vehicle is then machine polished to remove swirls and scratches with a cutting compound .
Once all that is done we finish off with a fine polish that refines the finish and takes out any holograms that might be present from the cutting polish, then it is time to take off the blue 3m tape then it is time for the wax or sealant to protect the finish,
We then clean polish the glass and apply a glass sealant
Apply a plastic dressing to exterior trim
Seal wheels with a wheel sealant and
Polish chrome exhaust tips.
PRICE –starting from £250-00 Depending on condition.